Author Topic: white oak elb?  (Read 1792 times)

0 Members and 1 Guest are viewing this topic.

Offline blackpanem

  • Member
  • Posts: 91
white oak elb?
« on: April 01, 2012, 10:26:29 pm »
would white oak work for an english long bow?

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: white oak elb?
« Reply #1 on: April 01, 2012, 10:42:19 pm »
I made a 40 pound one out of red oak... just over an inch wide at the handle straight tapering to 1/2 inch tips... Took about 1.75 inches of set though... a tad much for my personal preferences... A wider bow would be be better for white oak. It would work but probably not the best choice for a narrow bow... JMO..

Jon

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: white oak elb?
« Reply #2 on: April 02, 2012, 12:59:54 am »
White oak takes a bit of set. I've learned to only make recurves out of it to compensate. But I'm no expert on any type of bow or wood for that matter. All you can do is try and test the limits of the material. I'm sure you could make one but who knows how it will compare.
I say do it. Yah never know till you try. And let us know how it shoots.
Have you Google searched it or even on this forum?
Clatskanie, Oregon

Offline bubby

  • Member
  • Posts: 11,054
Re: white oak elb?
« Reply #3 on: April 02, 2012, 01:49:16 am »
i've had good luck with white oak boards taking little to no set, build one and find out, as tough as it is at least it prolly won't break ;D, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Weylin

  • Member
  • Posts: 2,296
Re: white oak elb?
« Reply #4 on: April 02, 2012, 01:55:55 am »
I don't think anything really "likes" to be an ELB there are just a few woods (yew, osage, etc.) that tolerate the narrow profile of an ELB. My advice would be to build a flatter bellied design with the oak. The ELB design just doesn't play to oak's strengths very well. I'm sure you could make one out of oak but it will take more set than if you had a wider flatter belly.

mikekeswick

  • Guest
Re: white oak elb?
« Reply #5 on: April 02, 2012, 05:24:39 am »
I don't think anything really "likes" to be an ELB there are just a few woods (yew, osage, etc.) that tolerate the narrow profile of an ELB. My advice would be to build a flatter bellied design with the oak. The ELB design just doesn't play to oak's strengths very well. I'm sure you could make one out of oak but it will take more set than if you had a wider flatter belly.
How about ipe, greeheart, pau amerillo, lemonwood, spindle, hornbeam ;) ;).....there are plenty of woods that like to be elb's but I agree that white oak or any oak imho are not in the list!
If you do decide to use oak make sure the belly is flat and the back trapped.

Offline blackpanem

  • Member
  • Posts: 91
Re: white oak elb?
« Reply #6 on: April 02, 2012, 05:40:25 pm »
ok thanks everybody!