« previous next »
Pages: [1]

Author Topic: Watched Curtis Smith  (Read 1635 times)

0 Members and 1 Guest are viewing this topic.

Offline Bill Skinner

  • Member
  • Posts: 384
Watched Curtis Smith
« on: March 03, 2012, 11:48:16 pm »
I watched Curtis Smith make several of his really wide, super thin points and blades today.  WOW!!!  I have to learn to knap all over again.
Logged

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Watched Curtis Smith
« Reply #1 on: March 08, 2012, 08:34:09 pm »
I hear ya Bill! I pulled him off to the side several years ago and with his help went to work on a peice of Georgetown i bought from him. That boy can really rare back and punch into a tiny platform with dead on accuracy! Unreal how thin he can get em..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Watched Curtis Smith
« Reply #2 on: March 08, 2012, 08:38:05 pm »
 :o
Logged
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Watched Curtis Smith
« Reply #3 on: March 10, 2012, 12:04:55 am »
Bill, Paul; is he percussion flaking or indirect flaking?
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Watched Curtis Smith
« Reply #4 on: March 10, 2012, 10:38:40 am »
He does direct percussion Eddie. Mostly with copper boppers he makes. He showed me one of his experimental peices he'd made earlier. Don't know what the W/T ratio was but was 3 1/2 - 4 inches wide and paper thin almost. Purty darn impressive :).
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.
Pages: [1]
« previous next »