« previous next »
Pages: [1]

Author Topic: cedar arrows  (Read 1932 times)

0 Members and 1 Guest are viewing this topic.

Offline steelslinger

  • Member
  • Posts: 242
cedar arrows
« on: January 10, 2012, 12:46:59 am »
I have some tight grain cedar that I would like to make into arrows. I do not know if I should split them into squares and plane them round, or cut them into squares with the table saw and plane them. the grain is pretty straight but it does move a little.
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: cedar arrows
« Reply #1 on: January 10, 2012, 01:33:56 am »
Hey Steel   I cut all my own and use the table saw, while they are still square ya can flex them all for ways and if there's a any "bad" stuff they will let go before all the work (fun) starts.
rich
Logged

Offline steelslinger

  • Member
  • Posts: 242
Re: cedar arrows
« Reply #2 on: January 10, 2012, 01:53:00 am »
Thats what I thought. I have a lot to cut. thanks for the reply.
Logged

Offline bowtarist

  • Member
  • Posts: 3,503
  • Primitive Archer Subscription Number PM103651
Re: cedar arrows
« Reply #3 on: January 10, 2012, 02:06:47 pm »
Cut to 3/8"square X whatever length on the table saw, then plan the initial four sides down until you have eight sides, then plan the eight sides down and sand.  Good luck and post pics, dpg
Logged
(:::.)    Osage music played daily. :)

Offline steelslinger

  • Member
  • Posts: 242
Re: cedar arrows
« Reply #4 on: January 10, 2012, 06:04:34 pm »
that sounds good to me.I will be cutting a bunch of arrows after work tonight.
Logged
Pages: [1]
« previous next »