« previous next »
Pages: [1]

Author Topic: 1/4" tip width?  (Read 1682 times)

0 Members and 1 Guest are viewing this topic.

Offline hook

  • Member
  • Posts: 86
1/4" tip width?
« on: February 08, 2012, 12:14:45 pm »
is 1/4" width tips on a kids bow too narrow? will it be a pain to cut string nocks?
Also if i have a ring violation on one limb and not the other, do I have to chase the ring all the way from tip to tip or just the limb thats violated?
the bow will not bend in the handle.
thanks
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: 1/4" tip width?
« Reply #1 on: February 08, 2012, 12:21:56 pm »
1/4 should be fine on a kids bow with a low number strand string, No you don't have to chase the whole thing if you don't want,just the limb violated. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

blackhawk

  • Guest
Re: 1/4" tip width?
« Reply #2 on: February 08, 2012, 12:43:40 pm »
If its fine on a strong hunting weight osage bow of mine it'll be fine for a kids bow  ;)...you'll have to glue an overlay on it.
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: 1/4" tip width?
« Reply #3 on: February 08, 2012, 01:18:44 pm »
back nocks on 40 lb bows with 1/4 inch tips
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline druid

  • Member
  • Posts: 475
Re: 1/4" tip width?
« Reply #4 on: February 08, 2012, 01:29:55 pm »
No, it is not too narrow. I have shot 40# bl bow that had under 1/4 mm tips.
Logged

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: 1/4" tip width?
« Reply #5 on: February 08, 2012, 02:17:22 pm »
  Not if you leave the first 4 inchs stiff if the volation if where it dos'nt been it will be ok.
 I make all my tips 3/8 to a 1/4. I cut the string groves in while it 1/2 inch and then work it down to where I want it. YOU CANT CUT YOUR NOCKS DOWN TO 1/4 INCH THEN CUT YOUR STRING GROVES IN. The amount of wood between the groves would be to narrow.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline RyanY

  • Member
  • Posts: 1,997
Re: 1/4" tip width?
« Reply #6 on: February 08, 2012, 04:50:57 pm »
1/4" tips are great for any bow. Its much easier to have the string rest on an overlay of some sort instead of cutting in string grooves at that width. Although I did make a a 50# bow with 1/4" tips and pin nocks.
Logged
Pages: [1]
« previous next »