Author Topic: crack in the ring layers  (Read 1176 times)

0 Members and 2 Guests are viewing this topic.

Offline luke the drifter

  • Member
  • Posts: 171
crack in the ring layers
« on: November 30, 2011, 09:42:04 pm »
here is my dilemma.  about half way up the stave and if you look at it from the side, i have a crack about three of four inches long.  it appears to be a rotten spot.  the length of the affected area is no more than four or five inches.  for lack of better description, it is a layered crack(delineating?).
the top of the area and the bottom are in great shape around it.  any ideas or is it a lost cause?

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: crack in the ring layers
« Reply #1 on: November 30, 2011, 10:03:51 pm »
Pics
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline johnston

  • Member
  • Posts: 976
Re: crack in the ring layers
« Reply #2 on: November 30, 2011, 10:16:12 pm »
What Pearlie said.

Lane

Offline Keenan

  • Member
  • Posts: 4,824
Re: crack in the ring layers
« Reply #3 on: November 30, 2011, 10:46:49 pm »
What kind of wood?  May be wind shake.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: crack in the ring layers
« Reply #4 on: December 01, 2011, 12:21:14 am »
Would it be like the growthrings were seperated?  Kinda like when effing glass delaminates?
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: crack in the ring layers
« Reply #5 on: December 01, 2011, 12:46:08 am »
Sounds like wind shakes to me too.  It is a delamination between growthrings caused by the tree being torqued by strong winds or possibly when the tree was felled. Sometimes you get only a small shallow one in a stave but sometimes it runs from side to side.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC