« previous next »
Pages: [1]

Author Topic: question about rawhide  (Read 2048 times)

0 Members and 1 Guest are viewing this topic.

youngbowyer

  • Guest
question about rawhide
« on: September 10, 2011, 05:18:40 pm »
I just got some rawhide and i want to get it on my bow asap. However I only have the regular titebond glue, can that be used to glue on the rawhide or do i need titebond 3?

Thanks.
Logged

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: question about rawhide
« Reply #1 on: September 10, 2011, 06:45:08 pm »
I think tight bond would work just fine, but all I've used is TB3
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: question about rawhide
« Reply #2 on: September 10, 2011, 10:11:34 pm »
Yes, but T2 is water resistant and T3 is water repellent. I've only used T2 on rawhide. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Re: question about rawhide
« Reply #3 on: September 11, 2011, 12:20:23 am »
I've used TB I, II & III.  I've also used cheap Elmer's (White) School Glue.  All with good success.
Logged
Matt Wirwicki
Owosso, MI

Offline JW_Halverson

  • Member
  • Posts: 11,882
Re: question about rawhide
« Reply #4 on: September 13, 2011, 12:40:13 am »
Just remember that Titebond I or Elmer's glue will come undone if it gets wet.   As long as you lay on a reasonably good finish and stay outa a direct rain you should be just fine!

If it comes off, put it back on!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Online Pappy

  • Global Moderator
  • Member
  • Posts: 31,912
  • if you have to ask you wouldn't understand ,Tenn.
Re: question about rawhide
« Reply #5 on: September 13, 2011, 09:06:39 am »
 I have used 1/2/3 all will work fine . :)
 
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: question about rawhide
« Reply #6 on: September 13, 2011, 12:17:51 pm »
Any of the carpender glues will work fine for adding rawhide. I've used them all with good success.   Tell us about the rawhide. Is in thin like deer of goat rawhide or thick like dog chews? If thick you will want to thin it some as to not add excessive weight(physical) to your limbs.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »