Author Topic: Pride goeth before the tip breaketh  (Read 1727 times)

0 Members and 1 Guest are viewing this topic.

Offline gstoneberg

  • Member
  • Posts: 3,889
Pride goeth before the tip breaketh
« on: August 26, 2011, 12:18:22 am »
I started another spall tonight.  Got it to a preform pretty quickly, but had a big turtleback on it.



Got the edge turned and knocked most of that off.



Had it just about ready to notch when....



Didn't want to give up on it though, and ended up with a little short point.



It's a little light, but I think it's wide enough to be legal.



I punched the notches and got a long flake on the last hit on that one side.  Interesting...

George
St Paul, TX

Offline Tower

  • Member
  • Posts: 2,298
Re: Pride goeth before the tip breaketh
« Reply #1 on: August 26, 2011, 12:21:40 am »
That's a nice save . Gorgeous stone to boot.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Pride goeth before the tip breaketh
« Reply #2 on: August 26, 2011, 12:21:56 am »
 Well, that's cute ;D. Good save, George.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: Pride goeth before the tip breaketh
« Reply #3 on: August 26, 2011, 12:59:09 am »
nice point G , thought you had been taking classes from me untill i saw that you saved it !

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Pride goeth before the tip breaketh
« Reply #4 on: August 26, 2011, 09:38:00 am »
Nice save!
(:::.) The ABO path is a new frontier to the past!

Offline Jimbob

  • Member
  • Posts: 871
Re: Pride goeth before the tip breaketh
« Reply #5 on: August 26, 2011, 11:41:04 am »
That is a nice save, I bet you had a few choice words when it broke.  I have broken the tips off of most of mine and it takes alot not to chuck it into the woods.
You skin that smoke wagon and we'll see what happens!---Are you gonna do something? Or just stand there and bleed?

"Show me a man who will jump out of an airplane, and I'll show you a man who'll fight for his country."
Lt. General James Gavin

http://www.facebook.com/#!/jimmy.filidei

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Pride goeth before the tip breaketh
« Reply #6 on: August 26, 2011, 12:53:12 pm »
Thanks guys.  Almost all the stone I have is grey to brown.  Not quite root beer colored but nice none-the-less.  I don't know if it got that color in heat treating or started that way.  I suspect the latter.  Patrick heat treated it.

The tip broke because I overshot a flake on the other side from the picture which made it thinner there then the point or the middle.  There was a hard spot on the edge there too and I was trying to get a nicer edge before sharpening.  I knew better but am just too stubborn.  I really like the little point, might do another one that shape leaving it thicker to get more weight.

George
St Paul, TX

Offline Tower

  • Member
  • Posts: 2,298
Re: Pride goeth before the tip breaketh
« Reply #7 on: August 26, 2011, 02:50:23 pm »
I'm not sure how your thinning your tips W/pressure. If it helps, I thin my tip W/pressure but I make them travel diagonally down toward the base. This helps prevent overshots & also helps remove any high spots near the edge W/out breaking the tip.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!