Author Topic: Hickory boards  (Read 1670 times)

0 Members and 1 Guest are viewing this topic.

Offline DLH

  • Member
  • Posts: 400
Hickory boards
« on: May 25, 2011, 02:22:40 am »
Few pieces of hickory I got from my grandpas shop...







Hope some bows are in there... The shorter pieces are 47in what should I do with them I was thinkin a bend through the handle shorty but don't have any clue where to start with something that short it would be a future project anyways... I really like the piece with the heart wood gonna save it for later too.

Offline bubby

  • Member
  • Posts: 11,054
Re: Hickory boards
« Reply #1 on: May 25, 2011, 07:14:20 am »
you can splice them at the handle if ya want a longer bow, I know there's a build a long on splicing billits, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Hickory boards
« Reply #2 on: May 25, 2011, 09:37:52 am »
You could do a handle splice or a short bow<<<hint ;) or you could send it to me to make a short bow<<<<<<<hint, hint, hint, HINT ;D That really looks like a good stash. Have funwith it
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Hickory boards
« Reply #3 on: May 25, 2011, 10:07:00 am »
One thing people never consider with shorter boards is to use it for just the working limbs in a bow, and to add on some levers/siyahs/ears via gluing and binding with sinew or glue soaked linen thread or something like that. That way you could take a 40" board and get a 60" bow out of it if your ears are both 10" long? What I mean is like a mollagabet or hunic style here. ... Just a thought,   ;D.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair