« previous next »
Pages: [1]

Author Topic: the "correct" way to string a bow?  (Read 2122 times)

0 Members and 1 Guest are viewing this topic.

Offline CanadianDIYer

  • Member
  • Posts: 9
the "correct" way to string a bow?
« on: April 01, 2011, 04:41:32 am »
Hey. I was just wondering if anyone had any "correct" ways for stringing a bow? i know some ways can damage bows, I dont have a bow stringer, though i could probably make one easy enough.
could anyone describe any methods they use?

thanks!
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: the "correct" way to string a bow?
« Reply #1 on: April 01, 2011, 08:38:00 am »
I use the push/pull method that Ed Scott showed me.
Logged
I started out with nothin' and I still got most of it left

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: the "correct" way to string a bow?
« Reply #2 on: April 01, 2011, 08:52:40 am »
I use the push /pull also except on Heavy or longer bows say over 66 inches. Then I use a stringer,probably best bet is using a stringer I just sometimes don't take the time. :)
   Pappy
 
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Holten101

  • Member
  • Posts: 295
Re: the "correct" way to string a bow?
« Reply #3 on: April 01, 2011, 08:54:10 am »
Straight, light bows (<60#) I push/pull. Heavier straight bows (60-80#) and recurves I use the step-though method.....and I use a stringer for warbows +80#.

Cheers
Logged

Offline aznboi3644

  • Member
  • Posts: 802
Re: the "correct" way to string a bow?
« Reply #4 on: April 01, 2011, 10:54:13 am »
60" and under I use push/ pull.  Anything over that I use either push pull or the step through...and even just putting my knee on the handle and pull the top limb to me for heavier or longer bows.

I've never noticed anymore set due to stringing and unstringing.  I always focus on evenly stressing both limbs white stringing and unstringing.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: the "correct" way to string a bow?
« Reply #5 on: April 01, 2011, 10:58:09 am »
I use my stringer 100% of the time on my wood bows. I do that because I figure I work too hard building a bow to risk breaking it doing it any other way. My one glass bow gets strung with the push/pull method.   
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Caius

  • Member
  • Posts: 47
Re: the "correct" way to string a bow?
« Reply #6 on: April 01, 2011, 11:36:10 am »
Might be lazy of me to ask, but how do you use a stringer?
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline CanadianDIYer

  • Member
  • Posts: 9
Re: the "correct" way to string a bow?
« Reply #7 on: April 02, 2011, 05:37:03 am »
OK, I just wanted to do a little survey, it seems most people use push/pull, and so do I, though, I use my knee to push, instead of my hand. This way seems ten bajillion times easier then with my arms :P

thanks!
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: the "correct" way to string a bow?
« Reply #8 on: April 02, 2011, 10:35:44 am »
I use a stringer. It is easier. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Kegan

  • Member
  • Posts: 2,676
Re: the "correct" way to string a bow?
« Reply #9 on: April 02, 2011, 02:29:43 pm »
I use push pull on everything except fiberglass recurves (thankfully I don't mess with them). Those I bend over my knee and have someone else move the loop. If the bow is too heavy for me to string with the push-pull, it's too heavy for me to shoot :D
Logged
Pages: [1]
« previous next »