« previous next »
Pages: [1]

Author Topic: splitting an osage stave  (Read 3093 times)

0 Members and 1 Guest are viewing this topic.

Offline DEllis

  • Member
  • Posts: 397
splitting an osage stave
« on: March 18, 2011, 02:02:53 am »
Or how to be as cheap(frugal?) as I can with bow wood ;D
I purchased a nice clean osage stave from pine hollow and decided I should be able to get two bows from it. Never done this before but heard that you can split it along a growth ring with small wedges.........I figgured screwdrivers should do it. Here're the progress pics.
That split on the left was from the bottom of the stave chased to one ring and narrowed a mite in that last pic.
« Last Edit: March 18, 2011, 02:11:20 am by DEllis »
Logged
Darcy Ellis
Fort Fraser BC Canada eh!

Offline sailordad

  • Member
  • Posts: 5,045
Re: splitting an osage stave
« Reply #1 on: March 18, 2011, 02:06:31 am »
i like it  8)

yup,im cheap too  :P
ive done that more than once
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline DEllis

  • Member
  • Posts: 397
Re: splitting an osage stave
« Reply #2 on: March 18, 2011, 02:09:02 am »
Also a couple pics to show what I started with. Drew the line on the ring I wanted to part it at all the way around and just tapped the screwdrivers in a little at a time. Took about one and a half laps around and it popped off fairly clean.
As you may well imagine there was some prayer involved......before and after ;D
Darcy :)
Logged
Darcy Ellis
Fort Fraser BC Canada eh!

Offline Autumnbear

  • Member
  • Posts: 109
    • My drum site
Re: splitting an osage stave
« Reply #3 on: March 18, 2011, 06:11:42 am »
That's just plain awesome. Great idea! ;D Watch out though or the next stave Pine Hollow sends you will be half the size!
Logged
"WHY DON'T WE LIBERATE, THESE UNITED STATES WE'RE THE ONES WHO NEED IT THE WORST
LET THE REST OF THE WORLD HELP US FOR A CHANGE AND REBUILD AMERICA FIRST"--MERLE HAGGARD

CLEAN AND SOBER AND PROUD OF IT HOSS!!!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: splitting an osage stave
« Reply #4 on: March 18, 2011, 08:05:10 am »
Nice work,I do that a lot,but usually just put a thin wedge in the end on the grain I want and
hit it.  :) :) It will usually split right down the ring. :) 2 for one can't beat that. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline DEllis

  • Member
  • Posts: 397
Re: splitting an osage stave
« Reply #5 on: March 19, 2011, 03:58:48 pm »
Quote from: Autumnbear on March 18, 2011, 06:11:42 am
That's just plain awesome. Great idea! ;D Watch out though or the next stave Pine Hollow sends you will be half the size!
That's funny stuff! ;D Good advice ;D
Thanks Pappy, I'm not brave enough to try it your way ;D
Darcy :)
Logged
Darcy Ellis
Fort Fraser BC Canada eh!

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: splitting an osage stave
« Reply #6 on: March 19, 2011, 04:07:03 pm »
I would say you should light a candle for not putting a screwdriver into one of those tile! ;)

Bevan R
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: splitting an osage stave
« Reply #7 on: March 19, 2011, 08:17:13 pm »
Yet another perfectly straight stave. ???  Wait till you see the one in red cellophane... >:D  You did well though.  I find that splitting sisters is either a really good, or a really bad experience.  I do it just like Pappy.

George
Logged
St Paul, TX

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: splitting an osage stave
« Reply #8 on: March 19, 2011, 11:36:01 pm »
Quote from: gstoneberg on March 19, 2011, 08:17:13 pm
Yet another perfectly straight stave. ???  Wait till you see the one in red cellophane... >:D  You did well though.  I find that splitting sisters is either a really good, or a really bad experience.  I do it just like Pappy.

George
gstoneberg, the stave you sent me was born for this, there was a split down a groth ring already, i just helped it along a little, and thats the bow i put pictures up of, i barely had to chase a ring at all ;D and i have a chance at another bow ;D ;D
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Postman

  • Member
  • Posts: 1,154
Re: splitting an osage stave
« Reply #9 on: March 19, 2011, 11:39:42 pm »
Nice job - nice looking staves. I have about 7 bent & busted up cheap screwdrivers from doing this also ;D Gonna try the end wedge method next time
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: splitting an osage stave
« Reply #10 on: March 20, 2011, 12:43:14 am »
I use a pair of hatchet heads to split off sisters.  They're thinner and sharper than my wedge is.  Actually, I use the hatchet heads more than my wedges splitting staves as well.

Good deal Noel, good luck with the other one.  I thought the one you finished from the first stave looked good.  Looked too heavy for me.

George
Logged
St Paul, TX
Pages: [1]
« previous next »