« previous next »
Pages: [1]

Author Topic: Anybody use a form for sinewing while reflexed?  (Read 1329 times)

0 Members and 1 Guest are viewing this topic.

Offline toomanyknots

  • Member
  • Posts: 3,132
Anybody use a form for sinewing while reflexed?
« on: October 27, 2010, 02:54:04 pm »
I got a good plan for one using clamps to hold onto the bow. Just kinda curious how people do this...
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Anybody use a form for sinewing while reflexed?
« Reply #1 on: October 27, 2010, 03:03:35 pm »
What I do is place the tips on 2x4 blocks and draw the handle down to the table. I will also tie a string between the nocks to help hold the shape. You need for your bow to be bending evenly before you do this.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sonny

  • Member
  • Posts: 742
Re: Anybody use a form for sinewing while reflexed?
« Reply #2 on: October 27, 2010, 03:53:05 pm »
I have used blocks under the tips as Pat mentions, tying the handle section down with a strong thin twine that gets sinewed over.
When the sinew has dried sufficiently I cut the twine on each side of the handle.
 
 
Logged
Never argue with an idiot. They'll drag you down to their level and beat you with experience.
Pages: [1]
« previous next »