« previous next »
Pages: [1]

Author Topic: Hey im new and have a qeustion  (Read 1478 times)

0 Members and 1 Guest are viewing this topic.

Offline colejack3

  • Member
  • Posts: 47
Hey im new and have a qeustion
« on: July 17, 2010, 12:19:08 am »
 Hey everyone I want to collect some natural shafts I have mulefat all around me. What is the best size to look for? Thanks in advance guys ;D
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,533
Re: Hey im new and have a qeustion
« Reply #1 on: July 17, 2010, 12:59:09 am »
I have heard of mulefat but can't remember the other common name. Is it salt cedar?  If so it makes very good, heavy and strong arrows.  With most shoot material you can start out cutting shoots that are 3/8 at the base. An open end 3/8" wrench makes a good gauge.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline colejack3

  • Member
  • Posts: 47
Re: Hey im new and have a qeustion
« Reply #2 on: July 17, 2010, 01:07:32 am »
cool so it doesnt matter for the skinny ends diameter as long as the bottom is 3/8?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,533
Re: Hey im new and have a qeustion
« Reply #3 on: July 17, 2010, 01:56:11 am »
That depends on the amount of taper. For most of what I use the 3/8" rule applies.   Generally you want the nock end(cured and skinned) to be about 5/16".
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline colejack3

  • Member
  • Posts: 47
Re: Hey im new and have a qeustion
« Reply #4 on: July 17, 2010, 10:07:10 am »
Thanks :)
Logged
Pages: [1]
« previous next »