Author Topic: Moisture Content  (Read 1933 times)

0 Members and 1 Guest are viewing this topic.

Offline Hoodoo

  • Member
  • Posts: 12
Moisture Content
« on: March 29, 2009, 06:51:27 pm »
Is there anyway besides using a moisture meter to check the moisture or at least a good estimation of moisture in a stave? I know 9% is about perfect...
Thanks

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Moisture Content
« Reply #1 on: March 29, 2009, 07:07:07 pm »
Montana, you can weigh your stave and monitor it's weight loss until it stops loosing weight for 3 days.
9% to 11% is a good m/c for most woods but for hickory, go to 6% to get the best out of your bow. In Montana, too much moisture shouldn't be a problem. Not enough moisture can cause bow failures.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC