Author Topic: twisted osage...any hope??  (Read 8884 times)

0 Members and 1 Guest are viewing this topic.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,902
  • if you have to ask you wouldn't understand ,Tenn.
Re: twisted osage...any hope??
« Reply #15 on: February 17, 2009, 09:52:13 am »
On the green Osage I would seal it up after you get it floor tillered and steam first,dry heat I will
almost guarantee it will check.Then after the steaming dry heat from then on to tweak it if you need to. I have straightened a lot worse than that many times. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: twisted osage...any hope??
« Reply #16 on: February 17, 2009, 09:54:19 am »
Thanks GregB and BigA.  I have heard and read what you said a couple times.  But, at this point in my growth as a bowyer it helps to hear the basics over and over to get them firmly intrenched in my thick head.   :)
Dave   Richmond, KY
26" draw

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: twisted osage...any hope??
« Reply #17 on: February 17, 2009, 10:37:36 am »
This was with a well cured osage stave but I went from this...



and this...



to this...all with a heat gun and a bit of oil.

Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: twisted osage...any hope??
« Reply #18 on: February 17, 2009, 12:32:46 pm »
I have to Agree with Gregg....that is exactly how I do all of my Snakey woods....here are two Vine Maple Staves I have in the Process....you can see what Gregg was talking about on the Lineal Grain by the way I have them laid out....hope that this Helps....

[attachment deleted by admin]
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline majsnuff

  • Member
  • Posts: 149
  • Shoot low boys the bad guys are riding ponies.
Re: twisted osage...any hope??
« Reply #19 on: February 17, 2009, 12:59:48 pm »
Tallk about great timing, I was just yesterday looking at an Osage stave with a 90deg. twist. Your post and the answers will help me a lot. My stave is 2 years cured, but I am still gonna try the "grease, steam, straighten, relfex" all in one move trick.
Thanks for starting this thread, and thanks for all the responses.

( I sorta feel guilty stealing ideas from other folks posts) ;) ;)
keep it simple
make it fun

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: twisted osage...any hope??
« Reply #20 on: February 17, 2009, 01:05:27 pm »
( I sorta feel guilty stealing ideas from other folks posts) ;) ;)
Thats what this Forum and All of Us are here for....to Help out in any way Possible....You wont find a more diverse bunch if you look for years....so pay attention .....ask questions....and use all of the Information that you can....and by all means pass it on....keep this artform going...it was about dead 20 years ago....thank God it has had a come back!!
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: twisted osage...any hope??
« Reply #21 on: February 17, 2009, 01:52:41 pm »
Thanks EL.  Your lay out really helpf.
Greg, nice looking bow.  Thanks for your help and support.

I'll try to get a bow layed out and to floor tiller this week.
Dave   Richmond, KY
26" draw

Offline Eric Krewson

  • Member
  • Posts: 5,348
Re: twisted osage...any hope??
« Reply #22 on: February 20, 2009, 02:37:52 pm »
Propeller is a lot easier to get out than any other osage anomaly. I do cut the limb section down to about 1" thick and 1 1/2" wide before I start.

Here is how I do it, I put two 25# bags of lead shot and a bunch of large C clamps in the bucket, a few at a time after heat the limb until the twist comes out.