ok Gurro's...
i need help to make a tiller or a tiller tree or tiller stand... i dont know the correct term.. soo please forgive me...
i have been trying to make these bows... and a the first few snaped on me but luckely i was to be able to save one as some may know from my last post...
however i dont have a "tiller tree..." i have been doing my tillering by floor tiller until i can sring it and then i put paracord or 550 cord as the string but that string gives a little bit and then i only have about an inch from string to bow when i really start to excersize the bow...
i know this is probably why i have been having such a difficult time trying to make these bows...
but i didnt have a book or video and i'm just try to do the best i can how i can... soo i string the bow and hold the string down with my foot and pull the bow up towards me and i bend over and look at the limbs while pulling?
... i know this must be a silly way of doing it.. but hell i didnt or still really dont know what im doing... just trying to do it..lol...
i did read some post and i picked up that somebody was telling somebody else you should start getting the fades to bend first... i take that , that the "fades" means the part that ends the handle and starts the limb correct??? when i read that i was like "OH" well that makes sense... lol... i might have had better luck if i knew that a few weeks ago..lol.. at least i think thats right... right???
anyhow... i need to make a tiller tree and i think i have a good idea of what its supposed to look like... i saw several on here while reading post but i could use some help and maybe some pics or instructions...
any help / advise wil be appreciated... thanks...
