« previous next »
Pages: [1]

Author Topic: Crepe Myrtle “Creek Bow”  (Read 1352 times)

0 Members and 1 Guest are viewing this topic.

Offline aznboi3644

  • Member
  • Posts: 802
Crepe Myrtle “Creek Bow”
« on: December 01, 2021, 07:28:22 pm »
A few months ago I went on a little vacation to the smokies.  Rented a tiny cabin next to a creek for a week.  I had this crepe myrtle stave split from summer 2020.  It was a very small sapling about 2” in diameter. 

I made this bow with some hand tools I brought while sitting next to the creek.   No tiller tree.  Just drawing in hand to check tiller.  Free handed heat treating it over a fire.  One limb took on just a hint of deflex maybe an inch.  The other limb stayed straight.  I have a short draw of 23-24”. 

The bow draws 45lb @ 24” and has zero set after shooting.  Just the hint of deflex in the one limb from the heat treatment. The back of the bow still has the bark on that I lightly sanded.  Finish was just bacon grease heated in over a fire with a layer of paraffin wax heated in after that.  Shoots well. 

Well I don’t know why the pics loaded sideways.  Hmmm
Logged

Offline RyanY

  • Member
  • Posts: 1,999
Re: Crepe Myrtle “Creek Bow”
« Reply #1 on: December 01, 2021, 08:46:51 pm »
Nicely done. I need to challenge myself and make one without the tillering tree one of these days.
Logged

Offline PlanB

  • Member
  • Posts: 639
    • SRHacksaw
Re: Crepe Myrtle “Creek Bow”
« Reply #2 on: December 01, 2021, 09:58:04 pm »
Exactly the kind of bow I love to hear about.
Direct.
Logged
I love it when a plan B comes together....

Offline Parnell

  • Member
  • Posts: 5,556
Re: Crepe Myrtle “Creek Bow”
« Reply #3 on: December 02, 2021, 11:39:56 am »
Great post.  It’s important to remember to have fun with the craft!
Logged
1’—>1’

gutpile

  • Guest
Re: Crepe Myrtle “Creek Bow”
« Reply #4 on: December 02, 2021, 01:44:44 pm »
sweet stuff right here..gut
Logged
Pages: [1]
« previous next »