Author Topic: Crossbow  (Read 1559 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Crossbow
« on: August 11, 2020, 12:56:46 pm »
Calling this done, unless you see something.  I decided to use how much can I hand span as the target draw weight. Turns out I am a strippling that can only span a 28 lb draw weight crossbow. Still, its good fun.  Yew bow, 9 inch draw, push pin trigger, mulberry stock.
Huge thanks to everyone who contributed to this build.




« Last Edit: August 11, 2020, 01:14:42 pm by stuckinthemud »

Offline DC

  • Member
  • Posts: 10,396
Re: Crossbow
« Reply #1 on: August 11, 2020, 01:36:51 pm »
I like it :D :D

Offline Yellowstave

  • Member
  • Posts: 131
Re: Crossbow
« Reply #2 on: August 11, 2020, 02:02:35 pm »
That thing is sweet!

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Crossbow
« Reply #3 on: August 11, 2020, 02:04:47 pm »
It's got the look :)
Del
Health warning, these posts may contain traces of nut.

Offline Hamish

  • Member
  • Posts: 1,557
Re: Crossbow
« Reply #4 on: August 11, 2020, 05:53:56 pm »
Looks pretty cool. How long is the bow?

Any chance of a side profile photo, and or one of you shooting it?

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Crossbow
« Reply #5 on: August 12, 2020, 02:24:19 pm »
28 inches ntn

Side view

Offline Hamish

  • Member
  • Posts: 1,557
Re: Crossbow
« Reply #6 on: August 12, 2020, 05:10:19 pm »

Very cool. Did you steam/dry heat the curve on the trigger?

Did you take any pic's of the push pin trigger set up before assembly?

I haven't seen this particular style before, a little different from other lockbows that I have seen. I like your approach a lot.

Offline silent sniper

  • Member
  • Posts: 281
Re: Crossbow
« Reply #7 on: August 12, 2020, 07:37:24 pm »
Very nice job 👍🏻 a wooden crossbow is definitely on my bucket list to build. Yours is an excellent example of what one should look like.
How does your shoot? How is the bolt speed with the short power stroke? Is it easy to shoot accurately?

Cheers,
Taylor. 

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Crossbow
« Reply #8 on: August 12, 2020, 11:48:06 pm »
Neat!  Never shot a crossbow, yet!  A friend has one I hope to shoot soon!  If I continue with Hunter Education here, I will need to know more about them, need to know more anyway!  They are part of archery Hunter Ed here, apparently.  May have to haunt the pawn shops (lol)!  Might try to make one someday!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Crossbow
« Reply #9 on: August 13, 2020, 04:19:35 am »
The mulberry steamed ridiculously easily, just a few seconds in the spout of a kettle.
This is a photo before fine tuning and finishing.  The comb stops the pin falling out when the tickler is pulled down, the pin has a square base which stops it falling out when the bow is inverted.   The key to the medieval look is to make the tiller the same length as the string
The bow lath in the photo is the original ash lath which failed due to bad design, the pin is the pivot pin not the firing pin which I made from horn.

Shooting sitting down is very civilised!  My practice bolts are not the best quality but I hit a 2ft square target at 15yds every shot from the get-go.  I havent tested for range yet but there was enough energy in the bolt,on the once I missed, to smash a 9mm bamboo bolt when it hit the wall behind the target

« Last Edit: August 13, 2020, 04:46:53 am by stuckinthemud »

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Crossbow
« Reply #10 on: August 13, 2020, 05:22:47 am »
Pretty cool. I keep thinking someday I want to make one. That one does have the look. And it looks like fun.
Bjrogg
A hot cup of coffee and a beautiful sunrise