« previous next »
Pages: 1 [2]

Author Topic: Board Bow Advice  (Read 2696 times)

0 Members and 1 Guest are viewing this topic.

Offline gilcd85

  • Member
  • Posts: 8
Re: Board Bow Advice
« Reply #15 on: March 26, 2020, 10:09:26 am »
Thank you for your responses! Good thing I didn't work on getting the area around the fades bending even more!

PatM, it was my first bow and at that point I already knew it won't reach my full draw so I saved myself some finishing work  ;)
Logged

Offline Deerhunter21

  • Member
  • Posts: 2,261
  • What do you despise? By this are you truly known.
Re: Board Bow Advice
« Reply #16 on: March 26, 2020, 10:17:25 am »
the bending is from the fade like the others said and that's kinda worrying. its only your second bow tho, you did a better job on the handle. maybe make the transition go a bit longer but it looks good.
Logged
Life before death. Strength before weakness. Journey before destination.

Offline gilcd85

  • Member
  • Posts: 8
Re: Board Bow Advice
« Reply #17 on: March 26, 2020, 10:18:34 am »
Got it. Thanks!
Logged

Offline scp

  • Member
  • Posts: 660
Re: Board Bow Advice
« Reply #18 on: March 26, 2020, 01:52:58 pm »
I will just start sanding it mainly outer 2/3 of limbs. I will also leave it stringed for several hours and shoot some arrows with it using shorter draw, say 24 inches. You are almost there.
« Last Edit: March 26, 2020, 01:56:31 pm by scp »
Logged

Offline gilcd85

  • Member
  • Posts: 8
Re: Board Bow Advice
« Reply #19 on: March 26, 2020, 02:00:45 pm »
Leaving it drawn and shooting arrows is in order to set the tiller and see how the design holds?
Logged

Offline scp

  • Member
  • Posts: 660
Re: Board Bow Advice
« Reply #20 on: March 27, 2020, 10:19:10 am »
Leave the bow Just stringed, not drawn. It's a simple way to "train" the bow to bend. All wood self-bows get easier to be drawn longer after they are exercised.
Logged
Pages: 1 [2]
« previous next »