« previous next »
Pages: [1]

Author Topic: Tip Weight/Spine  (Read 3275 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Tip Weight/Spine
« on: April 18, 2019, 09:45:26 am »
In my quest for light arrows I'm playing with tip weight. If I reduce the tip weight by 25gr I can take 5# spine out of the arrow. Same dynamic spine and the arrow still flies nice and makes the arrow maybe 30gr lighter. Then I can do it again. Another 30gr etc. Obviously there is going to be a point where this goes bad. Is it when the FOC moves too far back?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Tip Weight/Spine
« Reply #1 on: April 18, 2019, 11:00:42 am »
25gr lighter tip weight will increase spine value by 5#. Lighter tip make spine stiffer.
 Spined arrows shafts are sold as if they were a 28" finished arrow with a 125gr tip.  ie. shafts with an indicated 50 to 55# spine weight are to be used as a 50 to 55# spined, 28" arrow with 125gr point. Any changes to tip weight or arrow length will change the effective spine value.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Tip Weight/Spine
« Reply #2 on: April 18, 2019, 11:45:06 am »
 Seems like I've heard you say that before Pat....
 ;D ;)
Logged
Integrity is doing the right thing when no one is looking

Offline DC

  • Member
  • Posts: 10,396
Re: Tip Weight/Spine
« Reply #3 on: April 18, 2019, 12:05:25 pm »
That's what I said. If I take 25gr off the tip it makes the arrow 5# stiffer so I can reduce the spine by 5#. Yes he has said it before and I think he misunderstood me then too.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Tip Weight/Spine
« Reply #4 on: April 18, 2019, 01:31:45 pm »
Yes, I guess I misread what you wrote.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Tip Weight/Spine
« Reply #5 on: April 18, 2019, 01:38:23 pm »
Sorry Pat sometimes I don't write very clearly.
So  "Obviously there is going to be a point where this goes bad. Is it when the FOC moves too far back?"
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Tip Weight/Spine
« Reply #6 on: April 18, 2019, 08:46:11 pm »
I've not dealt much with FOC so I doubt I could give you a good answer. I guess if you are bare shaft testing the arrow would loose stability the farther back the FOC is. Fletching would change that though due to drag.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline TSA

  • Member
  • Posts: 272
    • www.trueshaftarchery.com
Re: Tip Weight/Spine
« Reply #7 on: April 18, 2019, 09:16:26 pm »
the turkish flight arrows actually have a negative FOC.
usually though negative foc is purported to cause arrows to somersault once the velocity bleeds off.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Tip Weight/Spine
« Reply #8 on: April 19, 2019, 08:35:11 am »
There must be a saw off point with the FOC where accuracy starts to suffer and increasing the fletching size to compensate just bleeds off speed. I have to do some reading on your website.
Logged
Pages: [1]
« previous next »