« previous next »
Pages: 1 [2]

Author Topic: ERC bow designs.  (Read 4866 times)

0 Members and 1 Guest are viewing this topic.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: ERC bow designs.
« Reply #15 on: January 30, 2019, 07:27:23 am »
Use hickory if you have it. If reliable is your goal then ERC isn't your target. Some will argue that, but anomalies exist everywhere.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

gutpile

  • Guest
Re: ERC bow designs.
« Reply #16 on: January 30, 2019, 07:31:56 am »
ERC and sinew are like peas and carrots.. I built a fine reflexed sinew back erc flipped tips.and she screams at 51@26.5.. extremely lightweight in hand.. love that bow.. you have to till slowly with cedar ..once floor tilled and braced I tilled with sandpaper ..very soft wood.. easily dented.. compression is fabulous however tension isnt as strong hence why backing is required for a heavier poundage bow....also erc is not commonly free of knots so a clean piece is a great find..I agree all sapwood makes a fine bow..mine only has a tad of heartwood on handle...gut
Logged

Offline Jim Davis

  • Member
  • Posts: 1,337
  • Reparrows
    • Reparrows
Re: ERC bow designs.
« Reply #17 on: January 31, 2019, 10:59:26 am »
Your requirements have hickory written all over them. Hickory would even improve by moving to Colorado.
Logged
Jim Davis

Kentucky--formerly Maine
Pages: 1 [2]
« previous next »