« previous next »
Pages: [1]

Author Topic: Question on moisture after staining  (Read 2990 times)

0 Members and 1 Guest are viewing this topic.

Clint Brown

  • Guest
Question on moisture after staining
« on: April 03, 2008, 09:59:01 pm »
Hi
 I have just finished staining and finishing my first bow. I would like to know how long to let my bow dry befor it is safe to string and shoot? I have the three volumes of the traditional bowyers bible and that has been where all my information has come from. Thanks for any info!
Clint
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: Question on moisture after staining
« Reply #1 on: April 03, 2008, 10:06:46 pm »
Welome to PA Clint as for the stain adding moisture I don't think its a problem. When the stain is dry it should be good to go.
Any chance of a picture or two?
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Jesse

  • Member
  • Posts: 2,129
Re: Question on moisture after staining
« Reply #2 on: April 03, 2008, 10:55:47 pm »
 Welcome As far as moisture Dana is right. Thats not a problem but depending on what you used to seal it some finishes require 3 days to fully cure even though they seem dry.
Jesse
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Clint Brown

  • Guest
Re: Question on moisture after staining
« Reply #3 on: April 05, 2008, 12:00:13 am »
Hi
 Thanks for the info. I am going to give my bow several day to be on the safe side. I just wanted to make sure that we were not talking about weeks. I will get some pictures soon.
 Thanks again!
 Clint
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Question on moisture after staining
« Reply #4 on: April 05, 2008, 01:44:09 am »
If the moisture is up you will be able to tell as soon as you string your bow. It will feel mushy.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Question on moisture after staining
« Reply #5 on: April 05, 2008, 08:01:16 am »
What kind of stain did you use?
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: [1]
« previous next »