Author Topic: Badger skin quiver  (Read 12281 times)

0 Members and 1 Guest are viewing this topic.

Zemenar

  • Guest
Badger skin quiver
« on: September 01, 2007, 08:14:05 pm »
Hi,
I remember reading in Primative Archer,on how to make a Badger skin quiver.
Can't find the magazine or article,does anyone know where I can get the instructions?
Thank you

Offline Calendargirl

  • Administrator
  • Member
  • Posts: 2,714
Re: Badger skin quiver
« Reply #1 on: September 02, 2007, 01:12:35 pm »
I will check on this for you. 
You shouldn't grow a wishbone where your backbone should be.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Badger skin quiver
« Reply #2 on: September 04, 2007, 05:15:15 pm »
There's a picture of a nice one on page 26 volume 5,issue 3,made by Norma Pinney
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline stiknstring

  • Member
  • Posts: 376
Re: Badger skin quiver
« Reply #3 on: September 07, 2007, 03:13:03 pm »
Its in the April/May 2007 issue of primitive archer....I was just rereading it last night.

Offline Calendargirl

  • Administrator
  • Member
  • Posts: 2,714
Re: Badger skin quiver
« Reply #4 on: September 19, 2007, 10:31:34 am »
Yes is it 15.2 issue which is the 2nd issue of this year page 12  ;D
You shouldn't grow a wishbone where your backbone should be.

Offline TRACY

  • Member
  • Posts: 4,523
Re: Badger skin quiver
« Reply #5 on: April 23, 2008, 12:51:07 am »
I made this quiver in December 07 after being inspired by Steve Sell's article "How to create a badger skin back quiver"  in the April/May issue(volume 15 issue 2 as stated by Calendargirl). I followed the basic instructions and in the end I added my own stuff to set it apart. The tube I made was actually smaller than the large tanned badger and so I opted for a hide that was a little smaller and better fit. I will use the same plans again but make the tube a little larger as Steve mentioned in this very easy to follow article.

Thanks Tracy

[attachment deleted by admin]
It is what it is - make the most of it!    PN500956

Offline Staver

  • Member
  • Posts: 164
Re: Badger skin quiver
« Reply #6 on: April 28, 2008, 12:00:12 am »
I posted one that I made just recently:

http://www.primitivearcher.com/smf/index.php/topic,6516.0.html

I got the idea to make the badger quiver from the April/May 2007 issue of PA.  Steve Sell had an excellent article on how to make one, so I got the materials and dove in!  Hope this helps (sorry a little late :-[)

Joe H