« previous next »
Pages: [1]

Author Topic: Handle question  (Read 1786 times)

0 Members and 1 Guest are viewing this topic.

Offline OTDEAN

  • Member
  • Posts: 140
Handle question
« on: June 19, 2018, 01:50:56 pm »
Hi

I am going to make a flat bow with a none bending handle.  I was wondering what width of handle and what depth of handle people would suggest for Hazel, Ash or Elm ? I am planning on having a 2" long handle and 2" long fades.  Overall bow length will be 2 x  30" working limbs with 8" for handle and fades so 68" in total length.  Would you guys go with 2" wide limbs or less for a target draw weight of 50lb @ 28"? 

Thanks
Logged

Offline OTDEAN

  • Member
  • Posts: 140
Re: Handle question
« Reply #1 on: June 19, 2018, 02:15:59 pm »
Sorry I meant a 4" long handle and 2" long fades either side!
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Handle question
« Reply #2 on: June 19, 2018, 02:31:35 pm »
Yeah  go 2" wide at the fades, if it starts to get to thin you can side tiller it
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Online Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Handle question
« Reply #3 on: June 19, 2018, 06:19:14 pm »
 :OK  x2
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Handle question
« Reply #4 on: June 19, 2018, 07:02:27 pm »
1"-1.25" is a comfy width for most. I start my depth at 2" and by the time I have it shaped and worked down most will be about 1.625-1.75" deep.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Handle question
« Reply #5 on: June 20, 2018, 06:59:03 am »
 :OK
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Handle question
« Reply #6 on: June 20, 2018, 06:59:17 am »
I make bulbus handles that are 1" wide at the arrow pass and 1 1.4" at the palm swell, very comfortable. I make them abut 1 1/2" tall.

Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: Handle question
« Reply #7 on: June 20, 2018, 10:08:06 am »
As long as it's not so shallow it starts to bend, make it so it's comfortable to you. I like mine a bit more shallow at 1-3/8" deep
Logged
Eric
Pages: [1]
« previous next »