« previous next »
Pages: [1]

Author Topic: Cascara heartwood/sapwood  (Read 1420 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Cascara heartwood/sapwood
« on: March 12, 2018, 01:10:39 pm »
Is there a marked difference between Cascara heartwood and sapwood? I have a piece with a thin section of heartwood that will probably disappear with tillering. I don't think chasing a ring in the sapwood is an option, I can barely see the rings with a 10X magnifying glass. They're not that small, just faint.
Logged

Offline aaron

  • Member
  • Posts: 1,037
Re: Cascara heartwood/sapwood
« Reply #1 on: March 12, 2018, 02:20:48 pm »
Sometimes has a slightly pink heart, i have never tried to remove sapwood to preserve it. Cascara seems just like vine maple...maybe a little softer
Logged
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline DC

  • Member
  • Posts: 10,396
Re: Cascara heartwood/sapwood
« Reply #2 on: March 12, 2018, 03:00:31 pm »
I guess I didn't ask right. Is there any difference performance wise, like Yew sapwood is good in tension and the heartwood is good in compression.
Logged

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Cascara heartwood/sapwood
« Reply #3 on: March 12, 2018, 06:28:46 pm »
Quote from: aaron on March 12, 2018, 02:20:48 pm
Sometimes has a slightly pink heart, i have never tried to remove sapwood to preserve it. Cascara seems just like vine maple...maybe a little softer

You have not worked much Cascara, not even close to the same in qualities, pink is Dogwood . As to the heart wood, seems slightly better in compression. Cascara (unless you chose to make it lumber by decrowning which I personally prefer) is best left as is.
« Last Edit: March 12, 2018, 06:33:59 pm by vinemaplebows »
Logged
Debating is an intellectual exchange of differing views...with no winners.
Pages: [1]
« previous next »