« previous next »
Pages: 1 [2]

Author Topic: Bamboo backed osage board bow design help  (Read 5035 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bamboo backed osage board bow design help
« Reply #15 on: January 17, 2018, 12:18:47 pm »
A bow with the center section parallel before tapering to the tips is called a semi-pyramid. The length of the parallel is not important but if only the last few inches are tapered then it's called overbuilt.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Bamboo backed osage board bow design help
« Reply #16 on: January 17, 2018, 01:14:44 pm »
On mine I keep the middle 18" parrallel then straight taper to tips
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Badger

  • Member
  • Posts: 8,124
Re: Bamboo backed osage board bow design help
« Reply #17 on: January 17, 2018, 01:21:08 pm »
  When I lay the bow up I usually taper about the last 14" and then once I start cleaning it up and tillering I smooth out the transition area by hand extending the taper a few inches further in.
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Bamboo backed osage board bow design help
« Reply #18 on: January 17, 2018, 02:06:18 pm »
If going with a reflex deflex profile i taper from the peak of the curve out to the tips then blend it in like badger said.
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline dave young

  • Member
  • Posts: 19
Re: Bamboo backed osage board bow design help
« Reply #19 on: January 19, 2018, 05:50:30 am »
I just ordered Deans video. So I will watch it before I start.
Logged
Pages: 1 [2]
« previous next »