« previous next »
Pages: 1 [2]

Author Topic: Workinh Vine maple  (Read 2777 times)

0 Members and 1 Guest are viewing this topic.

Offline JonW

  • Member
  • Posts: 1,906
Re: Workinh Vine maple
« Reply #15 on: August 11, 2017, 07:55:37 am »
I found that an old wore out 120 grit belt on the belt sander works rather well. If not for the steady downpour I would have it tillered. Got it to a 3 inch brace.
Logged

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Workinh Vine maple
« Reply #16 on: August 16, 2017, 12:57:10 am »
I've missed this post Jon but I am looking forward to seeing this one. 

Ryan,  I've packed that piece of vine maple around for the last two years.  I got it from you when I met you at the classic.  It pulled into so much reflex and it had some knots in some places I didn't know quite what to do with.  So this year at mojam I asked Jon if he would like to give it a go. In his capable hands it should turn out to be a nice shooter!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Limbit

  • Guest
Re: Workinh Vine maple
« Reply #17 on: August 19, 2017, 10:09:38 pm »
Angle grinder time?
Logged
Pages: 1 [2]
« previous next »