Author Topic: Growth ring separation ??  (Read 1520 times)

0 Members and 2 Guests are viewing this topic.

Offline bluegill68

  • Member
  • Posts: 140
Growth ring separation ??
« on: November 03, 2016, 10:50:27 pm »
Fellas,

I did a cursory search but din't find what I was looking for. In your experiences what causes the growth rings to separate? Is it relative to the individual tree? Will all sister staves/billets exhibit the separations? Can it be caused from improper handling of logs/staves?

A friend of mine has had several staves show up recently that have this malady? Just got me to thinking.

Thanks Sean

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Growth ring separation ??
« Reply #1 on: November 03, 2016, 11:07:19 pm »
From my experience most delamination in trees and bow staves occurs from "wind shear" caused by the tree twisting in the wind as they grow. I have noticed that some of the locust around here has a fungi that degrades the early wood causing delamination between heartwood rings but only after stressing the wood while building a bow.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Growth ring separation ??
« Reply #2 on: November 03, 2016, 11:56:36 pm »
I've seen it happen on staves while drying.  I cut a red osage tree a few years back and every stave developed side checks between the rings. 
I started out with nothin' and I still got most of it left

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Growth ring separation ??
« Reply #3 on: November 04, 2016, 10:07:31 am »
Drying stave-splits too quickly does it.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline bluegill68

  • Member
  • Posts: 140
Re: Growth ring separation ??
« Reply #4 on: November 05, 2016, 11:19:13 am »
Thanks for the replies I'll pass the info on to my friend.