Author Topic: Heat treating non-bending parts  (Read 1681 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Heat treating non-bending parts
« on: November 09, 2016, 05:14:45 pm »
Is there any point in heat treating a non bending part like a static re-curve or Molle tips? Something in the back of my mind tells me that heat treating it would increase its strength and allow it to be smaller and lighter and still not bend.

Offline PatM

  • Member
  • Posts: 6,737
Re: Heat treating non-bending parts
« Reply #1 on: November 09, 2016, 05:23:52 pm »
This has been mentioned many times on here and it works the way you have mentioned. Stiffer per mass.

Offline DC

  • Member
  • Posts: 10,396
Re: Heat treating non-bending parts
« Reply #2 on: November 09, 2016, 05:56:23 pm »
Thanks Pat

Offline bushboy

  • Member
  • Posts: 2,256
Re: Heat treating non-bending parts
« Reply #3 on: November 11, 2016, 08:21:18 am »
After I bend a recurve using localized steam,allowed to cool and sit for a spell,i lock them in by roasting with dry heat.other wise I suspect it would mostly pull out.
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.