« previous next »
Pages: [1]

Author Topic: Mallet head  (Read 3085 times)

0 Members and 1 Guest are viewing this topic.

Stringman

  • Guest
Mallet head
« on: April 05, 2016, 11:11:37 am »
Started with a chunk of firewood and a chainsaw and brought a 12" piece of hedge into the shop.


Chucked it up between centers and started turning.



Turned it round then began shaping it.



Going for a slight barrel taper from 4" and 7" OAL



Finished with beeswax, weighs 2lbs 2oz. How's it look JW?


Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: Mallet head
« Reply #1 on: April 05, 2016, 11:17:37 am »
Another terrible piece by Scott. ;) ;D
Logged
1’—>1’

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Mallet head
« Reply #2 on: April 05, 2016, 11:18:45 am »
Beautiful wood, Scott. Making a war club? 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: Mallet head
« Reply #3 on: April 05, 2016, 11:35:14 am »
I see your making some Ryholite knapping tools :o ;D ;D
Logged

Offline Lumberman

  • Member
  • Posts: 335
Re: Mallet head
« Reply #4 on: April 05, 2016, 11:37:35 am »
That is awesome
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Mallet head
« Reply #5 on: April 05, 2016, 12:03:34 pm »
Whatcha gonna do for the handle?
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Stringman

  • Guest
Re: Mallet head
« Reply #6 on: April 05, 2016, 12:22:16 pm »
You're right Bob, gotta get ready in case Mr Parker brings summore of that hard as heck crap he brought last year!  :o

Actually, John Q. Talksalotte mentioned needin something in this dimension and I'm just waiting to see if he likes it. Feels a little heavy ta me, but the weight may not be an issue for him. In any case, he wanted to save the handle work for himself.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Mallet head
« Reply #7 on: April 05, 2016, 12:44:47 pm »
Nice work Scott
Logged
I started out with nothin' and I still got most of it left

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Mallet head
« Reply #8 on: April 05, 2016, 12:46:04 pm »
That's a brute
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Mallet head
« Reply #9 on: April 05, 2016, 07:15:47 pm »
O man! I just ordered a large spoon gouge from Lee Valley Tools and I think this is gonna pair up nicely for some carving!  The mass of this osage will be really good for handling smaller rogue watermelons, too!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline stickbender

  • Member
  • Posts: 3,828
Re: Mallet head
« Reply #10 on: April 06, 2016, 12:42:04 am »

     Nice!  That should ring the bell!  Will make a nice "Commander".

                                   Wayne
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Mallet head
« Reply #11 on: April 06, 2016, 04:06:33 am »
I like it, very nice and should do the job.I made me one on a smaller scale a few years back, use it all the time.
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline chamookman

  • Member
  • Posts: 3,027
Re: Mallet head
« Reply #12 on: April 06, 2016, 06:03:04 am »
NICE ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

JacksonCash

  • Guest
Re: Mallet head
« Reply #13 on: April 06, 2016, 10:54:47 am »
Aww man, I wanna make one of those. I think I've got a chunk in the basement that's a good candidate.
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Mallet head
« Reply #14 on: April 08, 2016, 01:06:16 pm »
Very nice.  I made one out Ironwood many years ago in the shape of a rubber mallet for processing sinew, still have it.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: [1]
« previous next »