Author Topic: Getting better  (Read 1764 times)

0 Members and 1 Guest are viewing this topic.

Offline Part time Archer

  • Member
  • Posts: 26
Getting better
« on: November 29, 2015, 12:47:31 am »
Check this Hickory bow out. I named it Insomnia I got up everyday at 3:30 am for 4 weeks. Thanks for looking.

riverrat

  • Guest
Re: Getting better
« Reply #1 on: November 29, 2015, 04:40:51 am »
i like it. whats the specs? Tony

Offline Part time Archer

  • Member
  • Posts: 26
Re: Getting better
« Reply #2 on: November 29, 2015, 08:56:16 am »
thanks 54 inches ntn 50 lbs at 21 inches. has 1/4 inch set after a few hours of rest. 4 inch brace height. 3-ply b-50 string.
« Last Edit: November 29, 2015, 09:52:52 am by Part time Archer »

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Getting better
« Reply #3 on: November 29, 2015, 10:46:15 am »
1/4 in of hard set! Wow!

What's the set just after unbracing?
Whatever you are, be a good one.

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: Getting better
« Reply #4 on: November 29, 2015, 08:43:20 pm »
Good lookin bow part timer! Gotta love hickory.

Tattoo Dave
Rockford, MI

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Getting better
« Reply #5 on: November 29, 2015, 08:46:36 pm »
I'd pull that thing back a lot farther looks like your pulling about 15"
Clatskanie, Oregon

Offline Part time Archer

  • Member
  • Posts: 26
Re: Getting better
« Reply #6 on: November 29, 2015, 11:01:10 pm »
almost an inch. Which it started out with some reflex. 7 % humidity. I think the hickory can take the extra pull. thought about pulling an extra inch or two until set is around two inches total. These short bows are speedy. Thanks!
« Last Edit: November 29, 2015, 11:12:46 pm by Part time Archer »

blackhawk

  • Guest
Re: Getting better
« Reply #7 on: November 30, 2015, 06:22:18 am »
Agree with brycey...id yank that back farther,and farther than the 21" you stated as long as the tiller is still ok. Go inch by inch tho carefully montitoring your bend. It could change from what your showin now. Top limb might have a slight subtle hinge in the outer limb...it might show more if pulled more so be careful if ya do...ya might have to scrape it somemore. But yeah...that thing could handle 26-27" if handled n tillered correctly.