Author Topic: Arrowheads made from shell  (Read 2856 times)

0 Members and 1 Guest are viewing this topic.

Offline blindarcher

  • Member
  • Posts: 65
Arrowheads made from shell
« on: June 11, 2015, 08:48:07 pm »
I have been experimenting with making arrowheads from clam shells.  To be reasonably flat, my finished arrowheads are about the size of bird points.  They are light, but sharp.  I have not heard others making arrowheads from shells other than a rumor that Indians from the Pacific Northwest may have done so.  Has anyone heard of arrowheads from shells?

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Arrowheads made from shell
« Reply #1 on: June 14, 2015, 02:16:12 am »
My Tribe made them, Coos.  I know other Tribes in the area did as well.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,621
  • Sorry Officer, I was just gathering "materials".
Re: Arrowheads made from shell
« Reply #2 on: June 14, 2015, 02:19:13 am »
Shell arrowheads were made by Indians along the TX gulf coast.  Not too common but they seem to be made from relatively large shells.  The edges looked "nipped" rather than "knapped".  I'll try to find pictures...
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr