« previous next »
Pages: [1]

Author Topic: Sanding and spine  (Read 1486 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Sanding and spine
« on: June 09, 2015, 02:40:43 pm »
Most of you may know this.Yesterday I was sanding(aggressively) a bamboo arrow to get the spine down a bit. I would sand and then spine it. I got it to the weight I wanted. Checked it again this morning and the spine was up 5#. Ever notice how warm your hand gets when you're sanding? The heat makes the arrow more flexible. Doesn't take much.
Logged

Offline duke3192

  • Member
  • Posts: 195
  • pm109331
Re: Sanding and spine
« Reply #1 on: June 09, 2015, 09:50:31 pm »
DC, instead of sanding, use a sharp blade, razor knife, and scrape it and then sand lightly.
Logged
charter member of traditional bow hunters of Florida.

Offline DC

  • Member
  • Posts: 10,396
Re: Sanding and spine
« Reply #2 on: June 09, 2015, 10:10:32 pm »
Good plan, thanks
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: Sanding and spine
« Reply #3 on: June 10, 2015, 07:59:00 am »
I do the same as duke. Works very good.  :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »