Author Topic: Need staves, have obsidian.  (Read 2729 times)

0 Members and 1 Guest are viewing this topic.

Offline E. Jensen

  • Member
  • Posts: 481
Need staves, have obsidian.
« on: January 21, 2015, 09:53:53 pm »
I have about 15-25lbs of Northern Arizona obsidian.  Its smaller but knappers tell me its good stuff.  I'm looking for a nice tall clean straight forward stave for the 2015 Bow Trade.  Thanks

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Need staves, have obsidian.
« Reply #1 on: January 22, 2015, 01:24:48 pm »
Have u ever made a stave bow?
Nothing ventured nothing gained

Offline E. Jensen

  • Member
  • Posts: 481
Re: Need staves, have obsidian.
« Reply #2 on: January 22, 2015, 03:56:10 pm »
....yes...have you?

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Need staves, have obsidian.
« Reply #3 on: January 22, 2015, 04:20:11 pm »
Nevermind, had some staves.
Nothing ventured nothing gained

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: Need staves, have obsidian.
« Reply #4 on: January 22, 2015, 10:22:10 pm »
I have maple, ash and I believe I still have some hickory. PM me if ya like
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline E. Jensen

  • Member
  • Posts: 481
Re: Need staves, have obsidian.
« Reply #5 on: January 22, 2015, 10:58:18 pm »
I'm sorry I didn't mean to come across as rude or anything, I just did not understand the purpose of the inquiry, my apologies.

Offline steve b.

  • Member
  • Posts: 999
Re: Need staves, have obsidian.
« Reply #6 on: January 24, 2015, 12:56:20 am »
I have a bunch of staves too and I was going to give them to you but my first question was, "have you worked staves before", because these are not perfectly straight or naturally reflexed osage staves, but are secondary woods that make great bows if you know how to deal with whitewoods like ash or hazelnut or where you might have to make some heat corrections, deal with knots, back if need be, etc. 

Offline E. Jensen

  • Member
  • Posts: 481
Re: Need staves, have obsidian.
« Reply #7 on: January 24, 2015, 10:18:58 am »
Oh OK that was thoughtful of you.   Actually I can work crazy staves but a good thing to bring up because I am newer than some bowers and while I can handle anything it does take a bit of fuss at this point and I have a few fussy staves already and I think I would enjoy a fuss free stave.   I actually think that's the only kind I haven't tried yet!   Unless it's Snakey I'll take that any day of the week

Offline Eric Garza

  • Member
  • Posts: 587
Re: Need staves, have obsidian.
« Reply #8 on: January 24, 2015, 11:19:07 am »
Can you be more specific with respect to dimensions? How long, wide and thick of a stave are you looking for?

Offline E. Jensen

  • Member
  • Posts: 481
Re: Need staves, have obsidian.
« Reply #9 on: January 24, 2015, 11:24:04 am »
Idk regular.   68-72" 2-3" wide and thick

Offline PrimitiveTim

  • Member
  • Posts: 1,166
Re: Need staves, have obsidian.
« Reply #10 on: January 27, 2015, 07:14:40 pm »
I got a hickory sapling stave... could probably get two bows out of it.  One for sure.  It's pretty clean.
Florida to Kwajalein to Turkey and back in Florida again.  Good to be home but man was that an adventure!