« previous next »
Pages: [1]

Author Topic: making a bow  (Read 4909 times)

0 Members and 1 Guest are viewing this topic.

costicaldad

  • Guest
making a bow
« on: January 15, 2008, 08:49:16 am »
as an Australian i would like to know if there are any woods suitable for making a bow i live on the Murray river
Logged

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: making a bow
« Reply #1 on: January 15, 2008, 11:04:54 am »
Im not gonna be any help as I live in Missouri, but if you could list  what  kinds of trees you have near by maybe some of us not from down under could help out.
Logged
laugh. its good for ya

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: making a bow
« Reply #2 on: January 15, 2008, 11:21:56 am »
There was an Aussie who used to post on here a lot, and he had tried many of the native woods for bows. I don't remember exactly which, but I recall him saying that some of the Eucalyptus species were good, and he also found some osage growing somewhere. Try to pick the local trees that have the hardest, heaviest wood and they will probably make a bow.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: making a bow
« Reply #3 on: January 15, 2008, 11:26:34 am »
Try this. Jawge
http:// www .ozbow.net/ozbow_v2_001.htm
« Last Edit: January 15, 2008, 01:19:16 pm by Pappy »
Logged
Set Happens!
If you ain't breakin' you ain't makin!

costicaldad

  • Guest
Re: making a bow
« Reply #4 on: January 16, 2008, 10:48:39 am »
in my local area we have mally,river red gum ,pine, balar and box
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: making a bow
« Reply #5 on: January 16, 2008, 11:11:18 am »
I have heard that Box wood makes a good bow. Don't know if it's the same species as what you have though
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

MalV

  • Guest
Re: making a bow
« Reply #6 on: January 17, 2008, 12:39:46 am »
I live in Perth.
River Gum - not likely to be any good
Pine - dont bother
Our Box is not the same as Marc is talking about.
Never heared of Balar.

I have made a few bows from Mallee, and have had great results.
however, there is about 1000 species of mallee, but if it is straight and dense, should be good.
The ones I have used are 'fluted gimlett' and 'merritt'. sg about .9 and hard as tool steel. It is very good in tension, and resists compression. Not as brittle as the larger eucalypts, (i.e. euc. regans).
Keep the nocks small to reduce tip weight, and start with longer bows until you know the wood.

Good Luck - Mal
Logged

costicaldad

  • Guest
Re: making a bow
« Reply #7 on: January 17, 2008, 05:44:52 am »
thanks mal balar is a hard wood like iron bark, and living in the mallee i should find something
Logged

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: making a bow
« Reply #8 on: January 17, 2008, 06:29:56 pm »
Welcome to the tribe Costicaldad. Look forward to seeing what some of the stuff you come with looks like.  Danny
Logged
"You know a tree by the fruit it bears"   God

MalV

  • Guest
Re: making a bow
« Reply #9 on: January 17, 2008, 09:17:03 pm »
Just a bit of trivia on the type of mallee called 'fluted gimlett'

It was highly sought after in the goldfields here in Western Australia early last century, and was almost exclusively used to shore-up the mining tunnels. It was found to have superior strength to all other hardwoods in the arid/semi-arid area around Kalgoolie.

I can believe this, as a ELB made from this wood has almost ridiculously narrow/thin proportions for the poundage.
Logged
Pages: [1]
« previous next »