Author Topic: Messing around  (Read 2738 times)

0 Members and 1 Guest are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Messing around
« on: October 21, 2014, 02:00:09 pm »
What are the chances of a Maple, Mahogany, Cedar tri-lam surviving? Maple back, Cedar belly? I don't care if it comes in at 20 pounds. I glued it up with some reflex, and made a 4 lam riser for it last night. I can cut the shape tonight. Let me know what you think. Thanks

Joe
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Messing around
« Reply #1 on: October 21, 2014, 02:06:34 pm »
Never made one myself, never know till you try I guess. Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Messing around
« Reply #2 on: October 21, 2014, 02:17:26 pm »
I guess your about to find out!
I dont build lams, not sure about mahogany as a core.
I think guys usually use lightweight woods that glue well?
Let us know how she turns out

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: Messing around
« Reply #3 on: October 21, 2014, 02:29:12 pm »
What species of "mahogany"? There are at least ten totally different wood species called mahogany.
What species of "cedar"? There are at least five totally different wood species called cedar.

Any wood will make a bow. You just have to design the bow accordingly. A 1" wide ELB with a D-shaped cross section will simply not work for a hunting weight bow made from wood with a specific gravity below 0.4. A 3" wide flatbow is much more sensible option then. How wide and how long is your blank?
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline bubby

  • Member
  • Posts: 11,054
Re: Messing around
« Reply #4 on: October 21, 2014, 02:31:28 pm »
I tried a tri lam with mahogany core, it was a no go its a very brittle wood, but ya got it glued up go ahead can't hurt
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Messing around
« Reply #5 on: October 21, 2014, 02:45:34 pm »
The only thing I am going by on any of these woods is smell, and chemical reaction. The lightest color is what I suppose is Maple. It is maybe 3/4 wide, and 1/2 thick. The core is what I suppose to be mahogany, as it is darker, and sands to almost a pink color, and smells "Spicy". The core lam is about 1/8. The belly is for sure Cedar, as it smells like cedar, it is also 1/8. The "Maple looks to be maple, and when hit with baking soda and water have very little color change, so there is low tannin's, like maple would be. Tyke tied a string to one 50 inch section of it and threw it on my tiller rack, and pulled it to 27 inches before it broke, but that was just a 3/4 X 3/4 board. It ended up breaking at a run-off. I'll post some pictures when I get home. I have never built a Lam bow either.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Sasquatch

  • Member
  • Posts: 1,026
Re: Messing around
« Reply #6 on: October 21, 2014, 04:15:07 pm »
20lbs isn't much to ask from any wood. With some exception.  I would trap the back, which would lessen the compression stress that is going to be on the cedar.  In my opinion the cedar is the weakest link.

Offline DavidV

  • Member
  • Posts: 472
Re: Messing around
« Reply #7 on: October 21, 2014, 08:46:36 pm »
Do you have pictures? I think those woods are kindof iffy. "Cedar" could mean anything because western red cedar a true cedar will not make a bow while Eastern red cedar will. Eastern US that's basically the only cedar we even come across and it's actually a juniper.
Springfield, MO

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Messing around
« Reply #8 on: October 21, 2014, 11:00:11 pm »
I got home and figured I'll just make a bow of it and learn, one way or another! It's all be tillered now.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: Messing around
« Reply #9 on: October 22, 2014, 08:42:06 am »
ive glued up pieces that i didnt think would survive,but turned out to be a good bow.So you dont know unless you try! Sometimes its better to be lucky than good  ;D
laugh. its good for ya

Offline Tyke

  • Member
  • Posts: 343
Re: Messing around
« Reply #10 on: October 22, 2014, 09:06:15 am »
Just do it already
why buy it when you can build it

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Messing around
« Reply #11 on: October 22, 2014, 09:14:14 am »
Gosh Tyke, I did! Your knife is almost done too. Best work I have ever done!
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

mikekeswick

  • Guest
Re: Messing around
« Reply #12 on: October 22, 2014, 09:37:16 am »
That combo is pretty much doomed from the get go  >:D

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Messing around
« Reply #13 on: October 22, 2014, 09:39:58 am »
Yeah, Pine and alder bows don't work either, so we'll see! Only one way to find out.

How much should I trap the back? That is all that is left besides tiller.
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.