« previous next »
Pages: [1]

Author Topic: Rawhide string knocks?  (Read 2017 times)

0 Members and 1 Guest are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Rawhide string knocks?
« on: September 01, 2014, 02:24:45 pm »
I have seen it done here. What is the process? I want to try some on my current project.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: Rawhide string knocks?
« Reply #1 on: September 01, 2014, 03:08:12 pm »
Look here: http://www.primitivearcher.com/smf/index.php/topic,41217.45.html
post #57

good luck on your project!
Logged
Simon
Bavaria, Germany

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Rawhide string knocks?
« Reply #2 on: September 01, 2014, 04:39:03 pm »
You mean built up sinew nocks? Or rawhide overlays?
I'm doing the latter on a bow with pin nocks right now. I basically just cut a small piece of rawhide, soaked in water till soft, pad dry, then glue it up and wrap the tip. That easy
Logged

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Rawhide string knocks?
« Reply #3 on: September 01, 2014, 08:08:07 pm »
Goat, what do you wrap the tip with?
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Rawhide string knocks?
« Reply #4 on: September 02, 2014, 03:57:33 am »
just a small piece of rawhide. after the glue and hide dries, it shrinks a bit and is on there pretty good
Logged
Pages: [1]
« previous next »