« previous next »
Pages: [1]

Author Topic: Bow finishing  (Read 2163 times)

0 Members and 1 Guest are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Bow finishing
« on: August 15, 2014, 01:02:59 pm »
I had used spar varathan to finish a couple bows and then used spar urathane, and what a difference it made.
Clear clean finish.
Any others have similar experience?
Logged

Offline autologus

  • Member
  • Posts: 1,092
Re: Bow finishing
« Reply #1 on: August 15, 2014, 01:06:44 pm »
Lol, when I read the topic my puny brain read it as Bow Fishing and it sure wasn't what I was expecting.   :laugh:

Grady
Logged
Proud Hillbilly from Arkansas.

Offline nakedfeet

  • Member
  • Posts: 135
    • AJD Archery & Outdoors
Re: Bow finishing
« Reply #2 on: August 15, 2014, 01:34:10 pm »
Just started using spar urathane. Can't comment too much, but I like it so far. I like it more than the "fast drying" polyurethane I used for a while. Dries faster.
Logged

Offline NeolithicMan

  • Member
  • Posts: 562
  • No beliefs, just ideas
Re: Bow finishing
« Reply #3 on: August 15, 2014, 02:50:52 pm »
I am a big fan of Tru-oil for a finish, especially over stains. takes longer to do several coats but its got a great feel and look, and I dont mind the smell. Polys are real handy though!
Logged
John, 40-65# @ 28" Central New York state. Never enough bows, never enough arrows!

Offline Wooden Spring

  • Member
  • Posts: 437
Re: Bow finishing
« Reply #4 on: August 15, 2014, 03:31:47 pm »
I use about 5 coats of Teak Oil. It's cheap, easy to use, no streaks or runs, and after you rub it down with 0000 Steel wool once it dries, it makes it feel smooth as glass!
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Bow finishing
« Reply #5 on: August 15, 2014, 04:03:50 pm »
That's all I use except when I go primitive then it is grease. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline autologus

  • Member
  • Posts: 1,092
Re: Bow finishing
« Reply #6 on: August 15, 2014, 04:10:22 pm »
I use Tru-oil too and like NeolithicMan I don't mind the smell actually I kinda like it.

Grady
Logged
Proud Hillbilly from Arkansas.
Pages: [1]
« previous next »