Author Topic: Mulberry stave-How to fix these Knots?  (Read 8610 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Mulberry stave-How to fix these Knots?
« Reply #30 on: March 23, 2014, 02:30:53 pm »
The belly generally isn't a problem with knots. I would put super glue on each one and let it cure then begin scraping again.
  Mulberry is a cousin to osage. Even though it I lighter it is quite strong and can compete with osage in performance. Tip  overlays will remedy the problem of the sapwood denting.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Mulberry stave-How to fix these Knots?
« Reply #31 on: March 23, 2014, 02:35:50 pm »
Tips are overlayed, the dents are on the belly from the bowyers knot being squeezed so tight with a FF tillering string. I was actually thinking of a little belly tip overlay on the bottom limb to remedy that.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Mulberry stave-How to fix these Knots?
« Reply #32 on: March 23, 2014, 02:39:16 pm »
I don't use FF so I don't have an answer for that.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Mulberry stave-How to fix these Knots?
« Reply #33 on: March 23, 2014, 03:10:03 pm »
all the mulberry I have is pretty darn hard, never thought of it as being soft
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline DuBois

  • Member
  • Posts: 2,020
Re: Mulberry stave-How to fix these Knots?
« Reply #34 on: March 23, 2014, 03:37:33 pm »
OK then, I'll just dig out the little bit I can easily get to that is rot and super glue away.
Thanks folks.

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: Mulberry stave-How to fix these Knots?
« Reply #35 on: March 23, 2014, 03:52:23 pm »
Trees are wonderful... they put in extra wood around knots so that we can make bows. Since punky wood serves no purpose, you can get rid of it and fill in or not as you choose. Your draw weight and draw length desires are conservative, so should be safe with a non-perfect stave. Looking at your pictures, I'd just make a bow out of it and expect it to hold together. Enjoy.
Nothing flying, Nothing dying

Offline DuBois

  • Member
  • Posts: 2,020
Re: Mulberry stave-How to fix these Knots?
« Reply #36 on: March 23, 2014, 04:06:10 pm »
Good point Michael  ;D
How you doin?
Didn't I send you a mulberry?

Offline Josh B

  • Member
  • Posts: 3,741
Re: Mulberry stave-How to fix these Knots?
« Reply #37 on: March 23, 2014, 04:09:28 pm »
Those little knots don't amount to much Doobs.  You can dig em out and fill em or just dope em like Pat said.  Personally, I'd just saturate em in super glue and move on.  Josh

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: Mulberry stave-How to fix these Knots?
« Reply #38 on: March 23, 2014, 06:24:02 pm »
I have no mulberry, but I'm always looking. By September I'll be moving from Alaska to San Diego. I really hope to establish some hobby-friends down south... All of my bowyer work has been solo for years. Other than virtual with Y'all.
If you want to send that stave to me, I'll finish it up and send it back, promise. Actually, I'd do that with anybody's work at this point :).

Nothing flying, Nothing dying

Offline DuBois

  • Member
  • Posts: 2,020
Re: Mulberry stave-How to fix these Knots?
« Reply #39 on: March 23, 2014, 08:17:42 pm »
I've got a mulberry and a hickory that look like bananas if you want to try to wrangle them into shape?