« previous next »
Pages: [1]

Author Topic: looking for a how to on splinter repair  (Read 1104 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
looking for a how to on splinter repair
« on: February 22, 2014, 07:10:23 am »
I have been searching but can't find a good how to on how to repair a splinter on the back of an osage bow with a sinew warp. I wanted to give someone an example of how it is done correctly.
Logged
(:::.) The ABO path is a new frontier to the past!

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: looking for a how to on splinter repair
« Reply #1 on: February 22, 2014, 08:42:26 am »
As far as I've been told, a sinew wrap is not much more than just that: wrapping the bow limb and splinter in glue soaked sinew. Or you can wrap the area in glue soaked thread, such as serving, silk or linen thread. It's difficult to make a "how to" of just two steps...wrap with thread and apply glue...

Some pics: https://www.primitivearcher.com/smf/index.php?topic=36608.0
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: looking for a how to on splinter repair
« Reply #2 on: February 22, 2014, 09:41:40 am »
I'd super glue the splinter first then wrap and set the wrap in glue. You can also do a rawhide backing after gluing the splinter.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »