« previous next »
Pages: [1]

Author Topic: Just got my Clifton cabinet scrapers...  (Read 1687 times)

0 Members and 1 Guest are viewing this topic.

Offline Cloudfeather

  • Member
  • Posts: 431
Just got my Clifton cabinet scrapers...
« on: February 10, 2014, 10:56:12 pm »
Here's the question. Do they come sharpened or do I have to sharpen them myself? They seem to have a slight burr on one edge, but I've never used a cabinet scraper before. Is this what I should expect? Thanks.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Just got my Clifton cabinet scrapers...
« Reply #1 on: February 11, 2014, 12:13:18 am »
I would run a flat file over the edge, keeping it flat then burnish it, rolling the burr on each side of each edge.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Just got my Clifton cabinet scrapers...
« Reply #2 on: February 11, 2014, 03:51:41 am »
My general rule on all new woodworking equipment is that nothing comes sharpened and ready for use.  Of course there are exceptions...... But they are rare IMHO.  Russ
Logged

Offline Cloudfeather

  • Member
  • Posts: 431
Re: Just got my Clifton cabinet scrapers...
« Reply #3 on: February 12, 2014, 12:27:07 am »
Tried em out and they work pretty dang good. Found a couple videos on how to sharpen them for future reference. Thanks guys.
Logged
Pages: [1]
« previous next »