Author Topic: Cresting set up  (Read 12359 times)

0 Members and 1 Guest are viewing this topic.

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Cresting set up
« on: December 20, 2007, 08:17:21 pm »
I was looking at the cresting jigs in 3 Rivers, and figured, "I can make one, all I need is a motor". So, I did. I found my Dad's cordless drill and put the flathead screw adapter on it. Then I cut a 'V' shape into a scrap piece of cedar, and I had my cresting jig. Later I found that it is best to put the tip of the arrow into something (say, a box) to keep it in position.

Here's the set up, it works very well!
    
http://i113.photobucket.com/albums/n236/Thebowguy/000_0014-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0012-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0017-2.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0017-1.jpg
http://i113.photobucket.com/albums/n236/Thebowguy/000_0016-2.jpg

        Sean
Dallas/Fort Worth Tx.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Cresting set up
« Reply #1 on: December 20, 2007, 08:42:40 pm »
Looks great Sean.  I discovered that the slower it spins the better it works for me.  Justin
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Cresting set up
« Reply #2 on: December 20, 2007, 10:40:28 pm »
  Good idea Shawn and nice job on the arrows.When you get around to making a permanent one ,a BBQ rotisserie motor works good.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Cresting set up
« Reply #3 on: December 20, 2007, 11:41:58 pm »
...or an old sewing machine motor! ;)
  Cool arrows Sean. You are doing a nice job on your cresting and fletching. My cresting looks like a drunk did it! ;D   Tell me about your arrow with the split fletching. How do they fly? Noisy?   Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Re: Cresting set up
« Reply #4 on: December 20, 2007, 11:55:20 pm »
Thanks, guys, and great ideas.
Pat, the arrow in question did fly very well, I just broke it today. :(   The only problem was in drawing, the feathers would push the arrow out from the bow, so I will probably only use it for decorative arrows in the future, 'cause it sure looks nice!
    Sean
Dallas/Fort Worth Tx.

Offline DanaM

  • Member
  • Posts: 9,211
Re: Cresting set up
« Reply #5 on: December 21, 2007, 05:11:44 am »
Nice arra's Sean, I haven't bothered with cresting as I lose them to fast to be worth it. >:(
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline madcrow

  • Member
  • Posts: 1,531
  • Swift, Silent, and covered in wood shavings.
Re: Cresting set up
« Reply #6 on: December 21, 2007, 05:53:10 am »
I use an old sewing machine motor mounted to a board.  Works great.  I did add something to it though.  I bored a hole through one of the top corners straight through and put in a 1/4" bolt with a wing nut.  Now I don't have to keep constant pressure with my foot and the speed is adjustable.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Cresting set up
« Reply #7 on: December 21, 2007, 09:23:04 am »
Quote
My cresting looks like a drunk did it! 

Mine, too, and for good reason!  ;D  ;D

Sean, I've done almost the exact same thing before-great minds think alike  :)
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

whatareyadoin

  • Guest
Re: Cresting set up
« Reply #8 on: December 21, 2007, 07:47:09 pm »
Thats what I mean by Resourceful,That arrow with the yellow is the best