Author Topic: simple hickory bow  (Read 2405 times)

0 Members and 1 Guest are viewing this topic.

Offline danlaw

  • Member
  • Posts: 110
simple hickory bow
« on: December 14, 2013, 11:08:52 pm »
Here's a really straightforward hickory bow (ignore the ocean spray bow). If done right this bow takes about two to three hours to complete (depending on reflexing techniques). I'm practicing putting up pics - these are a bit fuzzy.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: simple hickory bow
« Reply #1 on: December 14, 2013, 11:14:59 pm »
I like both of them...would like to see a pic of the hickory bow from the back profile....darn nice table also.....I love wood!
There are no bad knappers, only bad flakes

Offline danlaw

  • Member
  • Posts: 110
Re: simple hickory bow
« Reply #2 on: December 14, 2013, 11:15:18 pm »
I should say two to three hours not including waiting for the epoxy to cure on the handle laminate

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: simple hickory bow
« Reply #3 on: December 14, 2013, 11:31:08 pm »
Shelves are for books!  >:D   Kidding aside, thats a great looking bow with real nice tiller and if you can do that in just a few hours your way ahead of me in bow building skills. Nice work Danlaw.
I ain't broke but I'm badly bent.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: simple hickory bow
« Reply #4 on: December 14, 2013, 11:33:36 pm »
That is gorgeous! Nicely done. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline burchett.donald

  • Member
  • Posts: 2,436
Re: simple hickory bow
« Reply #5 on: December 14, 2013, 11:42:32 pm »
Did you temper this bow? Nice side profile...
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline danlaw

  • Member
  • Posts: 110
Re: simple hickory bow
« Reply #6 on: December 14, 2013, 11:53:17 pm »
Thanks guys! I'm not ahead of you Badly Bent, I just built myself a jig for the table saw! I make quite a few of these so though I can hammer this out super quick, Ive put in my dues with hours of failure. The tips are bent and tempered. I forget if I toasted the whole belly on this one or not; I think I didn't.

Offline danlaw

  • Member
  • Posts: 110
Re: simple hickory bow
« Reply #7 on: December 15, 2013, 02:50:14 am »
Here's the ocean spray drawn. It has a bit of a flat spot on the bottom limb as I had to leave wood around a particularily knotty spot. 57# @ 28"

mikekeswick

  • Guest
Re: simple hickory bow
« Reply #8 on: December 15, 2013, 04:49:59 am »
A tapered lam jig? Of is it just a pyramid?

Offline Hrothgar

  • Member
  • Posts: 1,475
Re: simple hickory bow
« Reply #9 on: December 15, 2013, 10:16:00 am »
Interesting looking nocks, nice bow.
" To be, or not to be"...decisions, decisions, decisions.

Offline danlaw

  • Member
  • Posts: 110
Re: simple hickory bow
« Reply #10 on: December 15, 2013, 12:24:10 pm »
I made a simple tapering jig (side profile) - no laminations, just one piece of clear hickory.
I like these nocks as they are fast to make (I use a small rectangular rasp from lee valley that is just the right width so I never have to measure). I put two nocks in so I never need a fancy stringer, just a larger bow string. Sometimes I put three nocks in to vary the poundage for people who are just starting out. There are fancier bows for sure, but I am going for ultra efficient design on this one.

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: simple hickory bow
« Reply #11 on: December 15, 2013, 08:29:23 pm »
The stringer nocks are sweeeet.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline DuBois

  • Member
  • Posts: 2,020
Re: simple hickory bow
« Reply #12 on: December 15, 2013, 10:26:49 pm »
Here's a really straightforward hickory bow (ignore the ocean spray bow). If done right this bow takes about two to three hours to complete (depending on reflexing techniques). I'm practicing putting up pics - these are a bit fuzzy.
And if done my way it would only take a few weeks longer.  ;D and be half as nice.

Very nice!
« Last Edit: December 16, 2013, 02:16:33 pm by DuBois »

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,904
  • if you have to ask you wouldn't understand ,Tenn.
Re: simple hickory bow
« Reply #13 on: December 16, 2013, 07:16:24 am »
Very nice bow,well done. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: simple hickory bow
« Reply #14 on: December 16, 2013, 07:57:30 pm »
Nice hickory stick.....makes me want to start a hickory
DBar
Integrity is doing the right thing when no one is looking