Hey guys, I've been kinda slow with bow making lately, this whole 'school' thing gets in the way sometimes.
![Roll Eyes ::)](http://www.primitivearcher.com/smf/Smileys/default/rolleyes.gif)
Anyway, I've got a hackberry pyramid style bow here with more character than I'm used to dealing with and I could use some help with the tiller.
To give some context, its just shy of 2" wide at the fades and 63" long with 7 1/2" of handle/fade. I'm aiming for 50lbs at 26.5", not what it is right now because I
just finished floor tillering and heat treating and put a string on it for a low brace picture. It feels okay so far though.
There's a good size knot (healed over so its more of a knob, you can see there's a leaf right under it in the bottom pictures) in the upper limb that doesn't seem to bending, then it transitions quickly to a normal thickness limb. I'm not sure if that's the way it should be or what not so if yall could help me out, that'd be much appreciated.
![Smiley :)](http://www.primitivearcher.com/smf/Smileys/default/smiley.gif)
Here are the Pictures!
![](http://i1214.photobucket.com/albums/cc495/KenpoFighter1/SSPX0115_zpseb4c526f.jpg)
![](http://i1214.photobucket.com/albums/cc495/KenpoFighter1/SSPX0116_zpsa93ba217.jpg)
![](http://i1214.photobucket.com/albums/cc495/KenpoFighter1/SSPX0117_zpsb47a7cc5.jpg)
Thanks!