« previous next »
Pages: [1]

Author Topic: board bow question  (Read 1906 times)

0 Members and 1 Guest are viewing this topic.

Offline kid bow

  • Member
  • Posts: 434
board bow question
« on: February 10, 2013, 02:11:56 pm »
Ok so I want to build a board bow but how would I go about cutting it is I have no table saw or large cutting tools. Would the person at the store be able to cut the shape
Logged
i need nothing but my old bow and arrows.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: board bow question
« Reply #1 on: February 10, 2013, 02:41:33 pm »
The person building the bow generally makes the board into a bow shape.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bushboy

  • Member
  • Posts: 2,256
Re: board bow question
« Reply #2 on: February 10, 2013, 02:47:28 pm »
Hand saw,hachet , rasp and safety glasses.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline kid bow

  • Member
  • Posts: 434
Re: board bow question
« Reply #3 on: February 10, 2013, 02:54:52 pm »
Good point
Logged
i need nothing but my old bow and arrows.

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: board bow question
« Reply #4 on: February 12, 2013, 06:37:10 pm »
YOU are the bowyer, YOU need to cut the board into shape. Making a bow isn't about power tooling a piece of wood down to the lines. It's a craft.
No need to use power tools. Do you think cavemen had power tools? :P Plenty of handtools are used.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: board bow question
« Reply #5 on: February 12, 2013, 06:50:49 pm »
If this is your first bow let it bend in the handle. No glued on pieces. 1.5 in wide will get you 50-55# while 1 3/8 in wide will get you 45-40 if you do your job. They'll rip it for you. A handsaw will get the length and my site will help you. Choose a straight grained board. Jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/index.html
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: board bow question
« Reply #6 on: February 12, 2013, 07:45:11 pm »
On my first  bow, i did thethe out line with a flat file that basically did nothing. If you wanna make a bow, youll find a way
Logged
Pages: [1]
« previous next »