« previous next »
Pages: [1]

Author Topic: Backing strips or staves?  (Read 1311 times)

0 Members and 1 Guest are viewing this topic.

Offline KShip85

  • Member
  • Posts: 365
Backing strips or staves?
« on: January 03, 2013, 06:23:18 pm »
Just cut this nice 72" sugar maple log and it split beautifully straight.  My question is would this be better for staves or backing strips?  I cut it thinking backing strip but now I'm not as sure.  Maybe some of each?  I will say the main reason I was wanting some maple backing was to pair with cedar, I think the light color and fine grain would pair well aesthetically with ERC heartwood.  After getting the log I noticed that I will not be able to get wide enough strips quarter sawn for backing with only sapwood so I'd have to go with something else.  Has anyone ever tried joining two thinner strips together to get a wider backing?  Would that work?  Any input would be great :)

Kip












Logged
Kip Shipley    Bloomington, IN

Offline bow101

  • Member
  • Posts: 2,235
Re: Backing strips or staves?
« Reply #1 on: January 03, 2013, 08:39:22 pm »
Try either............
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline BL

  • Member
  • Posts: 71
Re: Backing strips or staves?
« Reply #2 on: January 03, 2013, 09:28:12 pm »
Or try both.  Luckily enough, you have two halves...

I'd imagine that the side-by-side strips would work if joined well, but I'm a newb here. 
Logged
Pages: [1]
« previous next »