« previous next »
Pages: 1 [2]

Author Topic: Fun Times With Elm  (Read 3582 times)

0 Members and 1 Guest are viewing this topic.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: Fun Times With Elm
« Reply #15 on: November 07, 2012, 09:29:45 pm »
I have worked with winged elm a good bit, and have found that it is easier for me to saw a kerf with my skil saw and leave it to dry for a while.  That saw line will open up a bit and give you a place to start your wedge.  It is still no fun.
Logged
Howard
Gautier, Mississippi

Offline Josh Shuck

  • Member
  • Posts: 57
Re: Fun Times With Elm
« Reply #16 on: November 07, 2012, 11:19:36 pm »
Thanks all for the input!  I really liked Ron's idea with lag bolts but the hardware store closed by the time I got home.  So I took the other part of his advice had the beer anyways and went to work.  I tried the wedge in the side method and it seemed to go a bit easier but by no means a picnic.  Staves have a bit of prop but I think I can work with them. 

I'll give them some time to season and then I'm anxious to try an ELB with them.  More to come!
Logged

Offline Josh Shuck

  • Member
  • Posts: 57
Re: Fun Times With Elm
« Reply #17 on: November 07, 2012, 11:20:23 pm »
Staves...
Logged
Pages: 1 [2]
« previous next »