« previous next »
Pages: [1]

Author Topic: BBO question  (Read 2770 times)

0 Members and 1 Guest are viewing this topic.

Offline possum

  • Member
  • Posts: 163
BBO question
« on: September 18, 2007, 01:40:51 pm »
I started taking the bark off an osage stave yesterday.  It has serious valley's in the back.  Well, I plan on doing a bamboo backing on it so those aren't worrying me.  My question is whether or not to just make it flat or flat and straight.  Do I just decrown it and then straighten with heat or do I just flatten it disregarding the growth ring altogether?
First bamboo backing, as if you couldn't tell. ::)

possum
Logged
"To ensure peace, security, and happiness, the rifle and pistol are equally indispensable. The very atmosphere of firearms everywhere restrains evil interference - they deserve a place of honor with all that is good." George Washington


mebane NC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: BBO question
« Reply #1 on: September 18, 2007, 02:29:14 pm »
With a stave you can just decrown it to add the boo backing. If you pre-tiller it first and add reflex at glue up you will be ahead of the game.   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »