« previous next »
Pages: [1]

Author Topic: sassafrass bow question  (Read 1126 times)

0 Members and 1 Guest are viewing this topic.

Offline ircherokee

  • Member
  • Posts: 5
  • flintknapper; bow maker'arrow builder.prim nut
sassafrass bow question
« on: March 27, 2012, 08:51:10 pm »
i made a sassafras bow a while back it was light and shot really well i was very surprized i backed it with linin after 60 shots or so it busted i was going to try rawhide this time do you think the rawhide will hold it together ive made a number of bows so tillering not the problem but sasafrass in my mind makes a right good bow very light wood and works easy real easy like its waxed thanks for any info   
Logged
ol the humanity throw away those compound bows thier no challange at all to harvest game with to easy might as well use a rifle

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: sassafrass bow question
« Reply #1 on: March 27, 2012, 09:29:20 pm »
I had the same problem with 2 sassafras bows. They were both board bows, but had one break during tillering, and one break after some shootin. I haven't tried it since, but have been itching to. The wood store has some quarter sawn that I have been wanting to try, but I'm still a little gun shy.

Tattoo Dave
Logged
Rockford, MI

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: sassafrass bow question
« Reply #2 on: March 27, 2012, 11:33:15 pm »
I would like a little more info about the one that broke.
Length (ntn), drawlength.
Can you tell if it broke in commpression or in tension?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: [1]
« previous next »