« previous next »
Pages: [1]

Author Topic: trapping a bow  (Read 1327 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
trapping a bow
« on: January 20, 2012, 06:25:12 pm »
So when you trap a bamboo backed bow would you trap just the backing or would the angle start at the top of the backing and continue through the belly?
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: trapping a bow
« Reply #1 on: January 20, 2012, 06:42:35 pm »
Lee got the question out before me.

Should a bamboo backing come to an edge or can it be 'trapped' as well, exposing some of the 'strands'?
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: trapping a bow
« Reply #2 on: January 20, 2012, 07:13:19 pm »
In trapping you make the cross section of the limb trapizoidal  ( /  \ ) from back to belly and not just the boo.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: trapping a bow
« Reply #3 on: January 21, 2012, 08:30:44 pm »
Thanks Pat that helps alot
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: trapping a bow
« Reply #4 on: January 21, 2012, 08:49:14 pm »
When 'trapping' a bamboo backed bow, I use the edge of the belly wood as a guide. I remove bamboo until the edge of the belly wood is exposed.
Logged
Pages: [1]
« previous next »