Author Topic: what do you guys think  (Read 3033 times)

0 Members and 1 Guest are viewing this topic.

Offline doulosparachristos

  • Member
  • Posts: 145
what do you guys think
« on: February 07, 2012, 07:29:12 pm »
i have some pretty good zebra wood boards hanging around and was wondering if anyone has put together a board bow using this stuff. i also have some pretty good hickory to back it with but for some reason i'm getting a bad vibe. but any ways, i was just wondering.
Philippians 3: 7-11

Online paulsemp

  • Member
  • Posts: 1,918
Re: what do you guys think
« Reply #1 on: February 07, 2012, 07:36:11 pm »
I have tried 2 times and both failed. I did a narrow and a wide design. I can not explain why but it just seamed to brittle for the entire belly. Both bows blew apart. But it is a hard wood? Save it for handles, tips, inlays ect. Maybe someone else has had luck with it?

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: what do you guys think
« Reply #2 on: February 07, 2012, 07:37:31 pm »
What about a tri-lam?
Bowmakers are a little bent, but knappers are just plain flaky.

Online paulsemp

  • Member
  • Posts: 1,918
Re: what do you guys think
« Reply #3 on: February 07, 2012, 08:33:36 pm »
that is a good idea, you do see it in a lot in fiberglass bows

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: what do you guys think
« Reply #4 on: February 07, 2012, 08:45:12 pm »
that is a good idea, you do see it in a lot in fiberglass bows

 I was thinking more of an all wood tri-lam. Hickory, zebra, walnut. Zebra handle and tips.
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Slackbunny

  • Member
  • Posts: 866
Re: what do you guys think
« Reply #5 on: February 07, 2012, 09:07:33 pm »
that is a good idea, you do see it in a lot in fiberglass bows

 I was thinking more of an all wood tri-lam. Hickory, zebra, walnut. Zebra handle and tips.

That would make a sharp looking bow for sure. Were it me I would go with that, but I am partial to all wood laminated bows anyways. Takes board bows to a whole new level in my opinion.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: what do you guys think
« Reply #6 on: February 07, 2012, 11:37:28 pm »
The zebra wood I had seemed kinda junky, so I asked a friend about it and he told me he tried some once and decided he would not sell a bow with it in the limbs !
He only builds FG bows that sell in excess of $1000 a piece !
So I got rid of mine , but some of you folks build bows from red oak boards that I feel is to junky for me Too, so to each his own!!
Guy
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Lone500

  • Member
  • Posts: 124
Re: what do you guys think
« Reply #7 on: February 08, 2012, 01:13:06 am »
Guy i think the reason we use "junk" a lot of times is cause we really dont have any better options.
Leon      Saluda, NC

Offline nativenoobowyer86

  • Member
  • Posts: 267
Re: what do you guys think
« Reply #8 on: February 08, 2012, 01:02:27 pm »
i feel like a lam between two hickory would be fine, like the core on a composite it would feel much less compression/tension force.  i was thinkin of doing something like this for my remaining purpleheart if my hickory backed purpleheart chysals :)
"If it feels like ur life is about to fall apart, back it with some rawhide an hope it holds together"

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: what do you guys think
« Reply #9 on: February 08, 2012, 01:52:57 pm »
I hear ya on the use what you have ,there are folks that think every thing I have is junk !
I just don't like to see folks use good money to get junk !
Money is way to hard to come buy !!
Have fun
Guy
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !